From: Peter Seiderer Date: Sat, 9 Nov 2019 10:45:20 +0100 Subject: [Buildroot] [PATCH v4 3/3] configs/raspberrypi3_64_defconfig: use pi3-miniuart-bt device tree overlay In-Reply-To: <20191109094520.5543-1-ps.report@gmx.net> References: <20191109094520.5543-1-ps.report@gmx.net> Message-ID: <20191109094520.5543-3-ps.report@gmx.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Use the pi3-miniuart-bt device tree overlay (as the 32bit raspberrypi3 defconfig) instead of the enable_uart option. Signed-off-by: Peter Seiderer --- Changes v1 -> v2: - no changes Changes v2 -> v3: - no changes Changes v3 -> v4: - resend with git sendemail.transferEncoding=base64 --- board/raspberrypi/post-image.sh | 9 --------- configs/raspberrypi3_64_defconfig | 3 +-- 2 files changed, 1 insertion(+), 11 deletions(-) diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh index bf9af5dc60..bbeb0bc721 100755 --- a/board/raspberrypi/post-image.sh +++ b/board/raspberrypi/post-image.sh @@ -28,15 +28,6 @@ __EOF__ # enable 64bits support arm_64bit=1 -__EOF__ - fi - - # Enable uart console - if ! grep -qE '^enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then - cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt" - -# enable rpi3 ttyS0 serial console -enable_uart=1 __EOF__ fi ;; diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_defconfig index f9a6f5fe1f..27141f364e 100644 --- a/configs/raspberrypi3_64_defconfig +++ b/configs/raspberrypi3_64_defconfig @@ -22,7 +22,6 @@ BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_PACKAGE_RPI_FIRMWARE=y -# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set # Required tools to create the SD image BR2_PACKAGE_HOST_DOSFSTOOLS=y @@ -36,4 +35,4 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M" # BR2_TARGET_ROOTFS_TAR is not set BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64" +BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64 --add-pi3-miniuart-bt-overlay" -- 2.23.0