From: Sasha Levin Subject: [PATCH AUTOSEL 4.14 049/109] arm64: dts: rockchip: Fix microSD in rk3399 sapphire board Date: Sat, 9 Nov 2019 21:44:41 -0500 Message-ID: <20191110024541.31567-49-sashal@kernel.org> References: <20191110024541.31567-1-sashal@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20191110024541.31567-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Sasha Levin , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Heiko Stuebner , Vicente Bergas , linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: linux-rockchip.vger.kernel.org From: Vicente Bergas [ Upstream commit 88a20edf76091ee7f1bb459b89d714d53f0f8940 ] The microSD card slot in the Sapphire board is not working because of several issues: 1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V and has a GPIO-based enable control. 2.- The vqmmc power supply can provide up to 3.3V, but it is capped in the DTS to just 3.0V because of the vmmc capability. This results in a conflict from the mmc driver requesting an unsupportable voltage range from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the range up to 3.3V. The hw should be able to stand this 0.3V tolerance. See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c. 3.- The card detect signal is non-working. There is a known conflict with jtag, but the workaround in drivers/soc/rockchip/grf.c does not work. Adding the broken-cd attribute to the DTS fixes the issue. Signed-off-by: Vicente Bergas Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- .../boot/dts/rockchip/rk3399-sapphire.dtsi | 24 ++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index ce592a4c0c4cd..6e40133372a80 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -113,6 +113,19 @@ vin-supply = <&vcc_1v8>; }; + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-always-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -315,7 +328,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; @@ -490,6 +503,13 @@ }; }; + sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + ; + }; + }; + usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = @@ -537,6 +557,7 @@ }; &sdmmc { + broken-cd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -545,6 +566,7 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; }; -- 2.20.1