From: Thomas Petazzoni Date: Tue, 12 Nov 2019 23:13:33 +0100 Subject: [Buildroot] [PATCH] configs/pc_x86_64_efi: add GPT partition table support. In-Reply-To: <20190807135457.6201-1-alexandre.payen@smile.fr> References: <20190807135457.6201-1-alexandre.payen@smile.fr> Message-ID: <20191112231333.740f52b2@windsurf> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Wed, 7 Aug 2019 15:54:57 +0200 Aalx wrote: > From: Alexandre PAYEN > > Based on commit fee29b05bb7db25e37c8a5175ce00dc712554edf[1]. > It add the use of GPT partition table on pc_x86_64_efi. > This commit removed the use of genimage and replace it with a shell > script. > > Since version 11, genimage support GPT partition table. > > Tested in QEMU, not on a physical device. > > So: > - revert commit fee29b05bb7db25e37c8a5175ce00dc712554edf[1] > - add GPT support > - tweak shell script to add the correct UUID in genimage config. > > [1]: https://git.buildroot.net/buildroot/commit/?id=fee29b05bb7db25e37c8a5175ce00dc712554edf > [2]: https://git.buildroot.net/buildroot/commit/?id=79b8540d624ac4846ba341b1b9691eccacf0bc05 > > Signed-off-by: Alexandre PAYEN > Cc: Carlos Santos > Cc: Thomas Petazzoni So, I kind of screwed up: I applied this version of the patch, taking into account the comments from Carlos, and then only realized that Carlos has sent a v2. From a quick look, Carlos v2 seems identical to the changes I've done to this v1. Carlos, could you double check that what I have applied is OK ? I did a test build, and booted under Qemu and it worked fine here. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com