From: Tudor.Ambarus at microchip.com Date: Wed, 13 Nov 2019 15:42:58 +0000 Subject: [U-Boot] [PATCH v2 4/4] configs: sama5d27_wlsom1_ek: mmc: Enable SPI NOR ethaddr retrieval In-Reply-To: <20191113154239.3281-1-tudor.ambarus@microchip.com> References: <20191113154239.3281-1-tudor.ambarus@microchip.com> Message-ID: <20191113154239.3281-5-tudor.ambarus@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Tudor Ambarus Enable the SPI NOR SFDP support and the Microchip QSPI driver. CONFIG_SPI_FLASH_SFDP_SUPPORT enables the SFDP Vendor parser, and for the SST case, the retrieval of the ethaddr from the SPI NOR flash. While touching the SPI NOR logic, sync with the sama5d27_wlsom1_ek_qspiflash_defconfig and enable CONFIG_SPI_FLASH_SPANSION. Signed-off-by: Tudor Ambarus --- configs/sama5d27_wlsom1_ek_mmc_defconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/configs/sama5d27_wlsom1_ek_mmc_defconfig b/configs/sama5d27_wlsom1_ek_mmc_defconfig index ffafc21ab3ce..ad59e73999b5 100644 --- a/configs/sama5d27_wlsom1_ek_mmc_defconfig +++ b/configs/sama5d27_wlsom1_ek_mmc_defconfig @@ -65,8 +65,12 @@ CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ATMEL=y CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_BUS=2 +CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_ATMEL=y CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_SST=y CONFIG_PHY_MICREL=y @@ -81,6 +85,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_SPI=y CONFIG_DM_SPI=y +CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y -- 2.9.5