From: Grygorii Strashko Date: Mon, 18 Nov 2019 23:04:39 +0200 Subject: [U-Boot] [PATCH 0/8] net: phy: dp83867: ti: sync with linux kernel and Message-ID: <20191118210447.7433-1-grygorii.strashko@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de hi The intention of this series is to sync TI DP83867 driver with mainline Linux kernel and ensure that proper PHY configuration in "rgmii-rxid" mode, which is done in the Patch 8. It also some code refactoring and optimization: patches 2,7. Grygorii Strashko (8): net: phy: ti: rename ti.c to dp83867.c net: phy: dp83867: move static initialization to .probe() dt-bindings: phy: dp83867: Add documentation for disabling clock output net: phy: dp83867: Add ability to disable output clock net: phy: dp83867: rework delay rgmii delay handling net: phy: dp83867: io impedance is not dependent on RGMII delay net: phy: dp83867: refactor rgmii configuration arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +- doc/device-tree-bindings/net/ti,dp83867.txt | 6 +- drivers/net/phy/Makefile | 2 +- drivers/net/phy/{ti.c => dp83867.c} | 243 ++++++++++++------- include/dt-bindings/net/ti-dp83867.h | 3 +- 5 files changed, 166 insertions(+), 91 deletions(-) rename drivers/net/phy/{ti.c => dp83867.c} (63%) -- 2.17.1