Return-path: Received: from alexa-out-tai-01.qualcomm.com ([103.229.16.226]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1iWrG0-0000xN-59 for ath10k@lists.infradead.org; Tue, 19 Nov 2019 00:20:40 +0000 From: root Subject: [PATCH v2 0/2] ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888 Date: Tue, 19 Nov 2019 08:20:26 +0800 Message-Id: <20191119002028.2519-1-root@vento-sdc-01.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org From: Yu Wang Tx bitrate got by command 'iw wlan0 link' is incorrect. These 2 patches will fix the issue. Changes from v1: [PATCH v2] ath10k: correct legacy rate in tx stats Remove wmi ops for getting legacy rate, instead, update the ratecode got from PPDU stats, to align with the existing tx rate processing. Yu Wang (2): ath10k: add ppdu stats support for QCA6174/QCA9377 ath10k: correct legacy rate in tx stats drivers/net/wireless/ath/ath10k/htt.c | 2 + drivers/net/wireless/ath/ath10k/htt.h | 30 ++++++ drivers/net/wireless/ath/ath10k/htt_rx.c | 146 +++++++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/mac.c | 2 +- drivers/net/wireless/ath/ath10k/mac.h | 1 + drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 + drivers/net/wireless/ath/ath10k/wmi-tlv.h | 3 + 7 files changed, 186 insertions(+), 2 deletions(-) -- 2.7.4 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k