From: Sasha Levin Subject: [PATCH AUTOSEL 4.19 029/219] ARM: OMAP1: fix USB configuration for device-only setups Date: Fri, 22 Nov 2019 00:46:01 -0500 Message-ID: <20191122054911.1750-22-sashal@kernel.org> References: <20191122054911.1750-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20191122054911.1750-1-sashal@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Aaro Koskinen , Tony Lindgren , Sasha Levin , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: linux-omap@vger.kernel.org From: Aaro Koskinen [ Upstream commit c7b7b5cbd0c859b1546a5a3455d457708bdadf4c ] Currently we do USB configuration only if the host mode (CONFIG_USB) is enabled. But it should be done also in the case of device-only setups, so change the condition to CONFIG_USB_SUPPORT. This allows to use omap_udc on Palm Tungsten E. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap1/include/mach/usb.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index e8ccf51c6f292..ec0235899de20 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -25,7 +25,7 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) led-y := leds.o -usb-fs-$(CONFIG_USB) := usb.o +usb-fs-$(CONFIG_USB_SUPPORT) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 77867778d4ec7..5429d86c7190d 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -11,7 +11,7 @@ #include -#if IS_ENABLED(CONFIG_USB) +#if IS_ENABLED(CONFIG_USB_SUPPORT) void omap1_usb_init(struct omap_usb_config *pdata); #else static inline void omap1_usb_init(struct omap_usb_config *pdata) -- 2.20.1