From: Alexander Dahl Date: Wed, 27 Nov 2019 13:44:32 +0100 Subject: [U-Boot] [RFC PATCH] ARM: at91: Print CPU serial number in cpuinfo Message-ID: <20191127124432.2547-1-ada@thorsis.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The SAMA5D2 and SAMA5D4 series SoCs have a 64-bit Serial Number (unique ID) burned in, which is displayed with 'print_cpuinfo()' now (in the same format the SAM-BA applet prints it). Example output: CPU: SAMA5D27 1G bits DDR2 SDRAM Serial number 0: 0x4630394b 1: 0x190d2750 Crystal frequency: 24 MHz CPU clock : 492 MHz Master clock : 164 MHz Signed-off-by: Alexander Dahl --- I looked over lots of other 'print_cpuinfo()' implementations for different SoCs and found none printing a unique ID at all. Is there another place for this? Is it just few SoCs have such a serial number at all? Or is it not desired to print those along with the other CPU info? Greets Alex --- arch/arm/mach-at91/armv7/cpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c index 5da067cda1..6d50e1aea4 100644 --- a/arch/arm/mach-at91/armv7/cpu.c +++ b/arch/arm/mach-at91/armv7/cpu.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #ifndef CONFIG_SYS_AT91_MAIN_CLOCK @@ -42,9 +43,16 @@ void arch_preboot_os(void) #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) { + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; char buf[32]; printf("CPU: %s\n", get_cpu_name()); + +#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D4) + printf("Serial number 0: 0x%08x\n", sfr->sn0); + printf(" 1: 0x%08x\n", sfr->sn1); +#endif + printf("Crystal frequency: %8s MHz\n", strmhz(buf, get_main_clk_rate())); printf("CPU clock : %8s MHz\n", -- 2.20.1