From: matthias.bgg at kernel.org Date: Wed, 4 Dec 2019 17:52:42 +0100 Subject: [PATCH 2/2] rpi: Enable DRAM bank initialization on arm64 In-Reply-To: <20191204165242.22463-1-matthias.bgg@kernel.org> References: <20191204165242.22463-1-matthias.bgg@kernel.org> Message-ID: <20191204165242.22463-2-matthias.bgg@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Matthias Brugger Up to now we only update the DRAM banks when we are define CONFIG_BCM2711. But our one binary approach uses a config that supports BCM2837 and BCM2711. As a result we only see one gigabyte of RAM on Raspberry Pi 4, although it has more RAM. Fix this by calling dram_init_banksize when we are booting a U-Boot build for arm64. Fixes: 5694090670 ("ARM: defconfig: add unified config for RPi3 and RPi4") Signed-off-by: Matthias Brugger --- board/raspberrypi/rpi/rpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 76f1c55b65..35fcef2b56 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -271,7 +271,7 @@ int dram_init(void) } #ifdef CONFIG_OF_BOARD -#ifdef CONFIG_BCM2711 +#ifdef CONFIG_ARM64 int dram_init_banksize(void) { int ret; -- 2.24.0