From: matthias.bgg at kernel.org Date: Thu, 5 Dec 2019 18:53:14 +0100 Subject: [PATCH v2 2/3] rpi: Enable DRAM bank initialization on arm64 In-Reply-To: <20191205175315.9225-1-matthias.bgg@kernel.org> References: <20191205175315.9225-1-matthias.bgg@kernel.org> Message-ID: <20191205175315.9225-2-matthias.bgg@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Matthias Brugger Up to now we only update the DRAM banks when we are define CONFIG_BCM2711. But our one binary approach uses a config that supports BCM2837 and BCM2711. As a result we only see one gibibyte of RAM on Raspberry Pi 4, even if it has more RAM. Fix this by calling dram_init_banksize. Fixes: 5694090670 ("ARM: defconfig: add unified config for RPi3 and RPi4") Signed-off-by: Matthias Brugger --- Changes in v2: - fix commit message - call dram_init_banksize independent of ARM64 board/raspberrypi/rpi/rpi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index e19610f40f..e367ba3092 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -272,7 +272,6 @@ int dram_init(void) } #ifdef CONFIG_OF_BOARD -#ifdef CONFIG_BCM2711 int dram_init_banksize(void) { int ret; @@ -284,7 +283,6 @@ int dram_init_banksize(void) return fdtdec_setup_mem_size_base(); } #endif -#endif static void set_fdtfile(void) { -- 2.24.0