From: Vignesh Raghavendra Date: Mon, 9 Dec 2019 10:37:32 +0530 Subject: [PATCH v2 4/8] arm: dts: k3-am65-main: add USB support In-Reply-To: <20191209050736.12018-1-vigneshr@ti.com> References: <20191209050736.12018-1-vigneshr@ti.com> Message-ID: <20191209050736.12018-5-vigneshr@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add support for USB0 and USB1 instances on the AM6 SoC. Signed-off-by: Vignesh Raghavendra --- arch/arm/dts/k3-am65-main.dtsi | 78 ++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi index 0f5da9a563d3..ab40dafceb52 100644 --- a/arch/arm/dts/k3-am65-main.dtsi +++ b/arch/arm/dts/k3-am65-main.dtsi @@ -251,4 +251,82 @@ interrupts = ; }; }; + + dwc3_0: dwc3 at 4000000 { + compatible = "ti,am654-dwc3"; + reg = <0x0 0x4000000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4000000 0x20000>; + interrupts = ; + dma-coherent; + power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ + + usb0: usb at 10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + snps,dis_u3_susphy_quirk; + }; + }; + + usb0_phy: phy at 4100000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x0 0x4100000 0x0 0x54>; + syscon-phy-power = <&scm_conf 0x4000>; + clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + ti,dis-chg-det-quirk; + }; + + dwc3_1: dwc3 at 4020000 { + compatible = "ti,am654-dwc3"; + reg = <0x0 0x4020000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4020000 0x20000>; + interrupts = ; + dma-coherent; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 152 2>; + assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + + usb1: usb at 10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + }; + }; + + usb1_phy: phy at 4110000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x0 0x4110000 0x0 0x54>; + syscon-phy-power = <&scm_conf 0x4020>; + clocks = <&k3_clks 152 0>, <&k3_clks 152 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + ti,dis-chg-det-quirk; + }; }; -- 2.24.0