From: Marek Vasut Date: Wed, 18 Dec 2019 07:59:15 +0100 Subject: [PATCH] ARM: stm32: Permit multiple board targets Message-ID: <20191218065915.12295-1-marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Setting TARGET_STM32MP1 in Kconfig always forces SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME to values set by the ST reference platforms. Allow changing that by pulling out the TARGET_STM32MP157C_DK2 and making the ST reference platform settings conditional on TARGET_STM32MP157C_DK2 . Other platforms can now define a different TARGET_ and thus override the SYS_ settings in their Kconfig. Signed-off-by: Marek Vasut Cc: Patrick Delaunay Cc: Patrice Chotard --- board/st/stm32mp1/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/board/st/stm32mp1/Kconfig b/board/st/stm32mp1/Kconfig index 4fa2360b4f..c84aa41f06 100644 --- a/board/st/stm32mp1/Kconfig +++ b/board/st/stm32mp1/Kconfig @@ -1,4 +1,8 @@ -if TARGET_STM32MP1 +config TARGET_STM32MP157C_DK2 + bool "support of STMicroelectronics STM32MP157C-DK2 Discovery Board" + default y + +if TARGET_STM32MP157C_DK2 config SYS_BOARD default "stm32mp1" @@ -22,8 +26,4 @@ config CMD_STBOARD This compile the stboard command to read and write the board in the OTP. -config TARGET_STM32MP157C_DK2 - bool "support of STMicroelectronics STM32MP157C-DK2 Discovery Board" - default y - endif -- 2.24.1