From: Tom Rini Date: Thu, 26 Dec 2019 19:46:37 -0500 Subject: [U-Boot] [uboot PATCH 3/4] phy: ti-pipe3: improve DPLL stability for SATA & USB In-Reply-To: <20191106142118.2756-4-rogerq@ti.com> References: <20191106142118.2756-1-rogerq@ti.com> <20191106142118.2756-4-rogerq@ti.com> Message-ID: <20191227004637.GP18106@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Nov 06, 2019 at 04:21:17PM +0200, Roger Quadros wrote: > For increased DPLL stability use the settings recommended in > the TRM [1] for PHY_RX registers for SATA and USB. > > For SATA we need to use spread spectrum settings even > though we don't have spread spectrum enabled. The > suggested non-spread spectrum settings don't work. > > [1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf > > Signed-off-by: Roger Quadros Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: