From: sbabic at denx.de Date: Sat, 28 Dec 2019 11:48:50 +0100 (CET) Subject: [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion In-Reply-To: <20191206162416.30200-1-igor.opaniuk@gmail.com> Message-ID: <20191228104850.4B4608170F@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > From: Igor Opaniuk > Not all CONFIG_FSL_ESDHC defines were properly replaced with > CONFIG_FSL_ESDHC_IMX, which broke U-boot proper booting on > Colibri iMX6 SoMs. > U-boot is stuck after this message: > Commercial temperature grade DDR3 timings, 64bit bus width. > Trying to boot from MMC1 > Fixes: e37ac717d7("Convert to use fsl_esdhc_imx for i.MX platforms") > Signed-off-by: Igor Opaniuk Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================