From: sbabic at denx.de Date: Sat, 4 Jan 2020 12:00:13 +0100 (CET) Subject: [PATCH] ddr: imx8m: Return error values from LPDDR4 training Message-ID: <20200104110013.74B8D8173A@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > From: Frieder Schrempf > In cases when the same SPL should run on boards with i.MX8MM, that > differ in DDR configuration, it is necessary to try different > parameters and check if the training done by the firmware suceeds or > not. > Therefore we return the DDR training/initialization success to the > upper layer in order to be able to retry with different settings if > necessary. > Signed-off-by: Frieder Schrempf Applied to u-boot-imx, -next, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================