From: Patrick Delaunay Date: Mon, 13 Jan 2020 11:34:59 +0100 Subject: [PATCH v3 05/21] gpio: remove GPIOD_REQUESTED In-Reply-To: <20200113103515.20879-1-patrick.delaunay@st.com> References: <20200113103515.20879-1-patrick.delaunay@st.com> Message-ID: <20200113103515.20879-6-patrick.delaunay@st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Remove the define GPIOD_REQUESTED as it is never used and use BIT() macro for other defines. Signed-off-by: Patrick Delaunay --- Changes in v3: None Changes in v2: - remove the unused GPIOD_REQUESTED include/asm-generic/gpio.h | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index d6cf18744f..7da2015805 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -117,11 +117,10 @@ struct udevice; struct gpio_desc { struct udevice *dev; /* Device, NULL for invalid GPIO */ unsigned long flags; -#define GPIOD_REQUESTED (1 << 0) /* Requested/claimed */ -#define GPIOD_IS_OUT (1 << 1) /* GPIO is an output */ -#define GPIOD_IS_IN (1 << 2) /* GPIO is an input */ -#define GPIOD_ACTIVE_LOW (1 << 3) /* value has active low */ -#define GPIOD_IS_OUT_ACTIVE (1 << 4) /* set output active */ +#define GPIOD_IS_OUT BIT(1) /* GPIO is an output */ +#define GPIOD_IS_IN BIT(2) /* GPIO is an input */ +#define GPIOD_ACTIVE_LOW BIT(3) /* value has active low */ +#define GPIOD_IS_OUT_ACTIVE BIT(4) /* set output active */ uint offset; /* GPIO offset within the device */ /* -- 2.17.1