From: Sasha Levin Date: Thu, 16 Jan 2020 12:02:46 -0500 Subject: [PATCH AUTOSEL 4.19 528/671] ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit In-Reply-To: <20200116170509.12787-1-sashal@kernel.org> References: <20200116170509.12787-1-sashal@kernel.org> Message-ID: <20200116170509.12787-265-sashal@kernel.org> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit From: Oscar A Perez [ Upstream commit 89b97c429e2e77d695b5133572ca12ec256a4ea4 ] According to the AST2500/AST2520 specs, these SoCs support up to 228 GPIO pins. However, 'gpio-ranges' value in 'aspeed-g5.dtsi' file is currently setting the upper limit to 220 which isn't allowing access to all their GPIOs. The correct upper limit value is 232 (actual number is 228 plus a 4-GPIO hole in GPIOAB). Without this patch, GPIOs AC5 and AC6 do not work correctly on a AST2500 BMC running Linux Kernel v4.19 Fixes: 2039f90d136c ("ARM: dts: aspeed-g5: Add gpio controller to devicetree") Signed-off-by: Oscar A Perez Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley Signed-off-by: Sasha Levin --- arch/arm/boot/dts/aspeed-g5.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index d107459fc0f8..f2e1015d75ab 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -247,7 +247,7 @@ compatible = "aspeed,ast2500-gpio"; reg = <0x1e780000 0x1000>; interrupts = <20>; - gpio-ranges = <&pinctrl 0 0 220>; + gpio-ranges = <&pinctrl 0 0 232>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; }; -- 2.20.1