From: Tom Rini Date: Fri, 24 Jan 2020 09:55:34 -0500 Subject: [PATCH v4 06/10] arm: dts: k3-j721e-r5: Add fs_loader node In-Reply-To: <20200122040005.7573-7-j-keerthy@ti.com> References: <20200122040005.7573-1-j-keerthy@ti.com> <20200122040005.7573-7-j-keerthy@ti.com> Message-ID: <20200124145534.GP26536@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Jan 22, 2020 at 09:30:01AM +0530, Keerthy wrote: > Add fs_loader node which will be needed for loading firmwares > from the boot media/filesystem. > > Signed-off-by: Keerthy > Signed-off-by: Lokesh Vutla > --- > arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts > index 28a355d49c..caeee8defe 100644 > --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts > +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts > @@ -18,6 +18,12 @@ > chosen { > stdout-path = "serial2:115200n8"; > tick-timer = &timer1; > + firmware-loader = &fs_loader0; > + }; > + > + fs_loader0: fs_loader at 0 { > + u-boot,dm-pre-reloc; > + compatible = "u-boot,fs-loader"; > }; > > a72_0: a72 at 0 { All u-boot, properties need to be in a -u-boot.dtsi file so it's very clear what things we are adding and what files can be replaced directly from Linux. Please fixup anything else in this area that wasn't already doing this and then add what you need here, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: