From: sbabic at denx.de Date: Mon, 10 Feb 2020 10:07:52 +0100 (CET) Subject: [PATCH v1 5/5] arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement In-Reply-To: <20200125080140.1267-6-lukma@denx.de> Message-ID: <20200210090752.B764C8170D@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > The 'enable-active-high' DTS property configures GPIO so it is active with > HIGH state (by default it is low). > The 'regulator-boot-on' property indicates that the regulator was enabled > in the 'earlier' stage - i.e. bootloader/firmware. > In the XEA case the 'fec-3v3' was configured (as a "wrapper" on GPIO0_0) in > very early SPL code, so it shouldn't be modified at latter stages. > Signed-off-by: Lukasz Majewski Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================