From: AKASHI Takahiro Date: Tue, 25 Feb 2020 14:02:21 +0900 Subject: [PATCH v5 01/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option In-Reply-To: <20e90a0f-40e1-04cb-451a-64e621fe3c67@gmx.de> References: <20200128082532.15943-1-takahiro.akashi@linaro.org> <20200128082532.15943-2-takahiro.akashi@linaro.org> <20e90a0f-40e1-04cb-451a-64e621fe3c67@gmx.de> Message-ID: <20200225050220.GB9257@linaro.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, Feb 23, 2020 at 11:56:09AM +0100, Heinrich Schuchardt wrote: > On 1/28/20 9:25 AM, AKASHI Takahiro wrote: > > Under this configuration, UEFI secure boot support will be added > > in later patches. > > > > Signed-off-by: AKASHI Takahiro > > This patch should be after all the patches that are necessary for secure > boot, i.e. after patch 09/16. I can take care of that. I disagree. Doing so will constrain bisect ability to some extent because any code under EFI_SECURE_BOOT will never have a chance to be compiled until this patch is applied. Then bisect result could be inaccurate. Thanks, -Takahiro Akashi > Best regards > > Heinrich > > > --- > > lib/efi_loader/Kconfig | 18 ++++++++++++++++++ > > 1 file changed, 18 insertions(+) > > > > diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig > > index a7afa3f29e88..4b09a07f1b0a 100644 > > --- a/lib/efi_loader/Kconfig > > +++ b/lib/efi_loader/Kconfig > > @@ -130,4 +130,22 @@ config EFI_RNG_PROTOCOL > > "Support for EFI_RNG_PROTOCOL implementation. Uses the rng > > device on the platform" > > > > +config EFI_SECURE_BOOT > > + bool "Enable EFI secure boot support" > > + depends on EFI_LOADER > > + select SHA256 > > + select RSA > > + select RSA_VERIFY_WITH_PKEY > > + select IMAGE_SIGN_INFO > > + select ASYMMETRIC_KEY_TYPE > > + select ASYMMETRIC_PUBLIC_KEY_SUBTYPE > > + select X509_CERTIFICATE_PARSER > > + select PKCS7_MESSAGE_PARSER > > + default n > > + help > > + Select this option to enable EFI secure boot support. > > + Once SecureBoot mode is enforced, any EFI binary can run only if > > + it is signed with a trusted key. To do that, you need to install, > > + at least, PK, KEK and db. > > + > > endif > > >