From: Lukasz Majewski Date: Sun, 8 Mar 2020 21:27:09 +0100 Subject: [PATCH 03/18] clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL In-Reply-To: <20200226171601.31142-4-giulio.benetti@benettiengineering.com> References: <20200226171601.31142-1-giulio.benetti@benettiengineering.com> <20200226171601.31142-4-giulio.benetti@benettiengineering.com> Message-ID: <20200308212709.5c6317a1@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, 26 Feb 2020 18:15:46 +0100 Giulio Benetti wrote: > mxsfb needs PLL5 as source, so let's setup it and set it as source for > mxsfb(lcdif). > > Signed-off-by: Giulio Benetti > --- > drivers/clk/imx/clk-imxrt1050.c | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/imx/clk-imxrt1050.c > b/drivers/clk/imx/clk-imxrt1050.c index e33d426363..2819ffb9ac 100644 > --- a/drivers/clk/imx/clk-imxrt1050.c > +++ b/drivers/clk/imx/clk-imxrt1050.c > @@ -238,9 +238,9 @@ static int imxrt1050_clk_probe(struct udevice > *dev) clk_dm(IMXRT1050_CLK_LCDIF, > imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70, > 28)); > -#ifdef CONFIG_SPL_BUILD > struct clk *clk, *clk1; > > +#ifdef CONFIG_SPL_BUILD > /* bypass pll1 before setting its rate */ > clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk); > clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); > @@ -271,7 +271,18 @@ static int imxrt1050_clk_probe(struct udevice > *dev) > clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1); > clk_set_parent(clk1, clk); > +#else > + /* Set PLL5 for LCDIF to its default 650Mhz */ > + clk_get_by_id(IMXRT1050_CLK_PLL5_VIDEO, &clk); > + clk_enable(clk); > + clk_set_rate(clk, 650000000UL); > + > + clk_get_by_id(IMXRT1050_CLK_PLL5_BYPASS, &clk1); > + clk_set_parent(clk1, clk); > > + /* Configure PLL5 as LCDIF source */ > + clk_get_by_id(IMXRT1050_CLK_LCDIF_SEL, &clk1); > + clk_set_parent(clk1, clk); > #endif > > return 0; Reviewed-by: Lukasz Majewski Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: