From: sbabic at denx.de Date: Tue, 10 Mar 2020 16:32:04 +0100 (CET) Subject: [PATCH] imx8qxp_mek: Fix the console command line string In-Reply-To: <20200217181701.25642-1-festevam@gmail.com> Message-ID: <20200310153204.4F4238152F@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > Currently the expansion of the console variable leads to > the following kernel command line: > console=ttyLP0,${baudrate} earlycon root=/dev/mmcblk1p2 rootwait rw > , which causes the console to not show characters after the LPUART driver > is probed as the 'baudrate' variable is not properly translated. > Fix it by splitting the console variable in two parts: one for the > ttyLP0 part and the other one for the baudrate, which matches the way > it is done on other i.MX targets. > Tested by successfully booting a mainline kernel on a i.MX8QXP MEK > board. > Signed-off-by: Fabio Estevam Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================