From: Cyril Hrubis Date: Fri, 27 Mar 2020 14:47:05 +0100 Subject: [LTP] [PATCH 0/2] [RFC] Add needs_devices && basic uart test Message-ID: <20200327134707.4532-1-chrubis@suse.cz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ltp@lists.linux.it This is not yet finished and work-in-progress, but it shows the directions I think the device drivers should take. This series adds a .needs_devices array of strings to the tst_test structure which is expected to hold well defined list of environment variables with well known names. In this case its UART_RX and UART_TX which should be obvious. Other tests may need I2C_ADDR etc. The value of these depends on a particular hardware/lab settings so apart from checking that these are defined the test libary does not attempt to do anything about these. The expectation here is that in the future the test description format I'm working on would be parsed by the test execution framework, which would then call a user defined helper script to get the values for these variables. For now we would have to run these scripts prior the LTP run to get these variables defined. Cyril Hrubis (2): tst_test: Add support for needs_devices device_drivers/uart01: Add uart01 test include/tst_test.h | 3 + lib/tst_test.c | 32 ++ runtest/kernel_misc | 5 + .../kernel/device-drivers/uart/.gitignore | 1 + testcases/kernel/device-drivers/uart/Makefile | 4 + testcases/kernel/device-drivers/uart/uart01.c | 522 ++++++++++++++++++ 6 files changed, 567 insertions(+) create mode 100644 testcases/kernel/device-drivers/uart/.gitignore create mode 100644 testcases/kernel/device-drivers/uart/Makefile create mode 100644 testcases/kernel/device-drivers/uart/uart01.c -- 2.24.1