From: unixmania at gmail.com Date: Sun, 29 Mar 2020 20:49:23 -0300 Subject: [Buildroot] [PATCH 2/3] package/procps-ng: add busybox-related comments to S02sysctl In-Reply-To: <20200329234924.14505-1-unixmania@gmail.com> References: <20200329234924.14505-1-unixmania@gmail.com> Message-ID: <20200329234924.14505-3-unixmania@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net From: Carlos Santos Explain the busybox peculiarities and how the script works with both versions of the sysctl utility. Signed-off-by: Carlos Santos --- package/procps-ng/S02sysctl | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/package/procps-ng/S02sysctl b/package/procps-ng/S02sysctl index 3a58578de4..fed64e91a6 100644 --- a/package/procps-ng/S02sysctl +++ b/package/procps-ng/S02sysctl @@ -1,4 +1,17 @@ #!/bin/sh +# +# This script is used by busybox and procps-ng. +# +# With procps-ng, the "--system" option of sysctl also enables "--ignore", so +# errors are not reported via syslog. Use the run_logger function to mimic the +# --system behavior, still reporting errors via syslog. Users not interested +# on error reports can add "-e" to SYSCTL_ARGS. +# +# busybox does not have a "--system" option neither reports errors via syslog, +# so the scripting provides a consistent behavior between the implementations. +# Testing the busybox sysctl exit code is fruitless, as at the moment, since +# its exit status is zero even if errors happen. Hopefully this will be fixed +# in a future busybox version. PROGRAM="sysctl" @@ -12,12 +25,6 @@ SYSCTL_ARGS="" # symlinks to it. No attempt is made to prevent this. SYSCTL_SOURCES="/etc/sysctl.d/ /usr/local/lib/sysctl.d/ /usr/lib/sysctl.d/ /lib/sysctl.d/ /etc/sysctl.conf" -# The "--system" option activates "--ignore", which is bad because invalid -# variable settings in the configuration files will not be reported on the -# system log. Use some scripting to mimic the --system behavior but still -# reporting errors. Users not interested on error report can put "-e" in -# SYSCTL_ARGS. -# # The file redirections do the following: # # - stdout is redirected to syslog with facility.level "kern.info" -- 2.18.2