From: Marek Vasut Date: Mon, 30 Mar 2020 12:58:34 +0200 Subject: [PATCH V2 2/2] ARM: dts: stm32: Repair SDMMC2 operation In-Reply-To: <20200330105834.9768-1-marex@denx.de> References: <20200330105834.9768-1-marex@denx.de> Message-ID: <20200330105834.9768-2-marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The eMMC uses different pinmux for the top four data lines, use such a pinmux, otherwise it takes a very long time until the test for 8bit operation times out. And this is the correct pinmux per schematic too. Signed-off-by: Marek Vasut Cc: Patrick Delaunay Cc: Patrice Chotard --- V2: No change --- arch/arm/dts/stm32mp157a-avenger96.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts index 3065593bf2..e7505c7596 100644 --- a/arch/arm/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/dts/stm32mp157a-avenger96.dts @@ -310,7 +310,7 @@ &sdmmc2 { pinctrl-names = "default"; - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>; non-removable; no-sd; no-sdio; -- 2.25.1