From: Wolfgang Denk Date: Wed, 01 Apr 2020 13:27:22 +0200 Subject: [PATCH 05/16] arm: stm32mp: spl: add bsec driver in SPL In-Reply-To: <20200331180330.5.I7a042a9ffbb5c2668034eddf5ace91271bb53c5f@changeid> References: <20200331180330.1.Ied6708bad5048382a57618f95d67c549aae49f42@changeid> <20200331180330.5.I7a042a9ffbb5c2668034eddf5ace91271bb53c5f@changeid> Message-ID: <20200401112722.7DD9C24003E@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Patrick Delaunay, In message <20200331180330.5.I7a042a9ffbb5c2668034eddf5ace91271bb53c5f@changeid> you wrote: > Add the bsec driver in SPL, as it is needed by SOC part number detection. > > Signed-off-by: Patrick Delaunay > --- > > arch/arm/dts/stm32mp15-u-boot.dtsi | 2 +- > arch/arm/mach-stm32mp/Makefile | 2 +- > arch/arm/mach-stm32mp/bsec.c | 4 ++-- > 3 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi > index 8f9535a4db..e0b1223de8 100644 > --- a/arch/arm/dts/stm32mp15-u-boot.dtsi > +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi > @@ -40,7 +40,7 @@ > }; > > &bsec { > - u-boot,dm-pre-proper; > + u-boot,dm-pre-reloc; > }; This seems to be an unrelated change? You should at least explain why this is needed, and if it's unrelated, spilt into a separate commit. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Good manners are the settled medium of social, as specie is of commercial, life; returns are equally expected for both. - Lord Chesterfield _Letters to his Son_, 25 December 1753