Return-Path: From: Sibi Sankar Subject: [PATCH 1/2] dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs Date: Wed, 15 Apr 2020 20:21:09 +0530 Message-Id: <20200415145110.20624-2-sibis@codeaurora.org> In-Reply-To: <20200415145110.20624-1-sibis@codeaurora.org> References: <20200415145110.20624-1-sibis@codeaurora.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-arm-msm-owner@vger.kernel.org To: bjorn.andersson@linaro.org, robh+dt@kernel.org Cc: agross@kernel.org, linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, evgreen@chromium.org, ohad@wizery.com, Sibi Sankar List-ID: 7C retail devices using MSA based boot will result in a fuse combination which will prevent accesses to MSS PERPH register space where the mpss clocks and halt-nav reside. However accesses to conn_box_spare0 in TCSR register space is still permitted so rename the binding appropriately to qcom,spare-regs and drop all accesses to the MPSS PERPH register space. Signed-off-by: Sibi Sankar --- .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 88dfa3fc15f78..607957ad32e7b 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -79,7 +79,7 @@ on the Qualcomm Hexagon core. "snoc_axi", "mnoc_axi", "qdss" qcom,sc7180-mss-pil: must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi", - "mss_crypto", "mss_nav", "nav" + "nav" qcom,sdm845-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng" @@ -173,16 +173,12 @@ For the compatible string below the following supplies are required: For the compatible strings below the following phandle references are required: "qcom,sc7180-mss-pil" -- qcom,halt-nav-regs: +- qcom,spare-regs: Usage: required Value type: - Definition: reference to a list of 2 phandles with one offset each for - the modem sub-system running on SC7180 SoC. The first - phandle reference is to the mss clock node followed by the - offset within register space for nav halt register. The - second phandle reference is to a syscon representing TCSR - followed by the offset within syscon for conn_box_spare0 - register. + Definition: a phandle reference to a syscon representing TCSR followed + by the offset within syscon for conn_box_spare0 register + used by the modem sub-system running on SC7180 SoC. = SUBNODES: The Hexagon node must contain two subnodes, named "mba" and "mpss" representing -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project