From: Johan Jonker Subject: [PATCH 2/2] ARM: dts: rockchip: fix phy nodename for rk3229-xms6 Date: Thu, 16 Apr 2020 19:03:21 +0200 Message-ID: <20200416170321.4216-2-jbx6244@gmail.com> References: <20200416170321.4216-1-jbx6244@gmail.com> Return-path: In-Reply-To: <20200416170321.4216-1-jbx6244-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rockchip.vger.kernel.org A test with the command below gives for example this error: arch/arm/boot/dts/rk3229-xms6.dt.yaml: phy@0: '#phy-cells' is a required property The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker --- arch/arm/boot/dts/rk3229-xms6.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts index 679fc2b00..933ef69da 100644 --- a/arch/arm/boot/dts/rk3229-xms6.dts +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -150,7 +150,7 @@ #address-cells = <1>; #size-cells = <0>; - phy: phy@0 { + phy: ethernet-phy@0 { compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"; reg = <0>; -- 2.11.0