From: Thomas Petazzoni Date: Fri, 17 Apr 2020 23:13:14 +0200 Subject: [Buildroot] [PATCH v3 0/3] configs,board: add OLPC XO laptops In-Reply-To: <20200416095954.364163-1-lkundrak@v3.sk> References: <20200416095954.364163-1-lkundrak@v3.sk> Message-ID: <20200417231314.614a76d8@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Lubomir, On Thu, 16 Apr 2020 11:59:51 +0200 Lubomir Rintel wrote: > With few consumer distros remaining to support the Geode-based systems, > let alone optimize for them, Buildroot is a very handy way to make good > use of a rather uniquely engineered XO-1 laptop. Also, with 5.3 kernel, > the XO-1.75 is in a pretty good shape. Thanks, I have applied your patches. One thing that was not good is that the kernel version was not explicitly specified, while we always do this in our defconfigs to ensure that the kernel version being built has been tested by someone, instead of using just the default latest kernel. I assumed you had tested with Linux 5.6, since it is currently the latest. Another thing that would be nice to have is a board/olpc/readme.txt, which gives some details on how to use the defconfigs, and especially how to flash/boot the resulting system on the hardware. See other readme.txt files in board/ for some examples. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com