From: sbabic at denx.de Date: Sun, 19 Apr 2020 11:08:12 +0200 (CEST) Subject: [PATCH v2 1/5] wandboard: Fix version detection for mx6q/mx6dl revD1 In-Reply-To: <20200417122713.30574-1-festevam@gmail.com> Message-ID: <20200419090812.4761C81A07@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > The detection of the revD1 version is based on the presence of the PMIC. > Currently revb1 device trees are used for mx6q/mx6dl variants, which > do not have the PMIC nodes. > This causes revD1 boards to be incorrectly be detected as revB1. > Fix this issue by using the revd1 device trees, so that the PMIC node can be > found and then the PMIC can be detected by reading its register ID. > Imported the revd1 device trees from mainline kernel version 5.7-rc1. > Reported-by: Heiko Schocher > Reported-by: Derek Atkins > Signed-off-by: Fabio Estevam > Tested-by: Derek Atkins > Tested-by: Heiko Schocher > Tested-by: Peter Robinson Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================