From: sbabic at denx.de Date: Sun, 19 Apr 2020 11:09:23 +0200 (CEST) Subject: [PATCH] ARM: imx6: DHCOM i.MX6 PDK: Fix usb-otg VBUS regulator In-Reply-To: <20200416085219.60921-1-hws@denx.de> Message-ID: <20200419090923.556CC81BED@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > During the conversion of this board to DM_REGULATOR, usb-mass-storage > was broken and started failing with the following error: > => ums 0 mmc 2 > UMS: LUN 0, dev 2, hwpart 0, sector 0x0, count 0xe90000 > Error enabling VBUS supply > g_dnl_register: failed!, error: -38 > g_dnl_register failed > Fix this by adding the relevant GPIO to the regulator node. > Fixes: 4ca99fe81aea ("ARM: imx: dh-imx6: Enable DM regulator") > Signed-off-by: Harald Seiler Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================