From: sbabic at denx.de Date: Sun, 19 Apr 2020 11:10:08 +0200 (CEST) Subject: [PATCH 3/4] config: imx: Enable CONFIG_PHY_FIXED on HSC and DDC i.MX53 boards In-Reply-To: <20200226113703.10526-4-lukma@denx.de> Message-ID: <20200419091008.5D3F0812A9@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > The CONFIG_PHY_FIXED is necessary to allow DSA switch work in U-Boot after > the > commit 3bf135b6c367 ("drivers: net: phy: Ignore PHY ID 0 during PHY probing"). > This particular device - LAN9303 - returns phy_id == 0. With > CONFIG_PHY_FIXED enabled HSC and DDC boards work again with the same U-Boot > binary. > Signed-off-by: Lukasz Majewski Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================