From: Michael Walle Subject: [PATCH v3 14/16] arm64: dts: freescale: sl28: map GPIOs to input events Date: Thu, 23 Apr 2020 19:45:41 +0200 Message-ID: <20200423174543.17161-15-michael@walle.cc> References: <20200423174543.17161-1-michael@walle.cc> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200423174543.17161-1-michael-QKn5cuLxLXY@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Andy Shevchenko , linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-hwmon-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: Linus Walleij , Bartosz Golaszewski , Rob Herring , Jean Delvare , Guenter Roeck , Lee Jones , Thierry Reding , =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= , Wim Van Sebroeck , Shawn Guo , Li Yang , Thomas Gleixner , Jason Cooper , Marc Zyngier , Mark Brown , Greg Kroah-Hartman , Michael Walle List-Id: linux-pwm@vger.kernel.org Now that we have support for GPIO lines of the SMARC connector, map the sleep, power and lid switch signals to the corresponding keys using the gpio-keys and gpio-keys-polled drivers. The power and sleep signals have dedicated interrupts, thus we use these ones. The lid switch is just mapped to a GPIO input and needs polling. Signed-off-by: Michael Walle --- .../freescale/fsl-ls1028a-kontron-sl28.dts | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index b73794d57db4..263ce50b0b79 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -9,6 +9,8 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" #include +#include +#include / { model = "Kontron SMARC-sAL28"; @@ -23,6 +25,36 @@ spi1 = &dspi2; }; + buttons0 { + compatible = "gpio-keys"; + + power-button { + interrupts-extended = <&sl28cpld + 4 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + label = "Power"; + }; + + sleep-button { + interrupts-extended = <&sl28cpld + 5 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + label = "Sleep"; + }; + }; + + buttons1 { + compatible = "gpio-keys-polled"; + poll-interval = <200>; + + lid-switch { + linux,input-type = ; + linux,code = ; + gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>; + label = "Lid"; + }; + }; + chosen { stdout-path = "serial0:115200n8"; }; -- 2.20.1