From: Tom Rini Date: Fri, 24 Apr 2020 13:08:06 -0400 Subject: [U-Boot 1/1] eth: mtk-eth: add mt7531 switch support in mediatek eth driver In-Reply-To: References: Message-ID: <20200424170806.GT4555@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Feb 18, 2020 at 04:49:37PM +0800, Landen Chao wrote: > mt7531 is a 7-ports switch with 5 embedded giga phys, and uses the same > MAC design of mt7530. The cpu port6 supports SGMII only. The cpu port5 > supports RGMII or SGMII in different model. > > mt7531 is connected to mt7622 via both RGMII and SGMII interfaces. > In this patch, mt7531 cpu port5 or port6 is configured to maximum > capability to align CPU MAC setting. > > The dts has been committed in the commit 6efa450565cdc ("arm: dts: > mediatek: add ethernet and sgmii dts node for mt7622") > > Signed-off-by: Landen Chao > Tested-by: Frank Wunderlich Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: