From: Jagan Teki Date: Wed, 6 May 2020 15:38:45 +0530 Subject: [Buildroot] [PATCH 2/2] sifive/hifive-unleashed: Support Mainline U-Boot, Linux In-Reply-To: <20200506100845.4356-1-jagan@amarulasolutions.com> References: <20200506100845.4356-1-jagan@amarulasolutions.com> Message-ID: <20200506100845.4356-2-jagan@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Add Mainline U-Boot, Linux kernel version for SiFive HiFive unleashed A00 board. Now, board would - Boot from MMC with U-Boot SPL - Linux version v5.6 Signed-off-by: Jagan Teki --- board/sifive/hifive-unleashed/extlinux.conf | 4 +++ board/sifive/hifive-unleashed/genimage.cfg | 15 ++++++--- .../hifive-unleashed/linux.config.fragment | 13 ++------ board/sifive/hifive-unleashed/post-build.sh | 5 +++ board/sifive/hifive-unleashed/readme.txt | 33 ++++++++++--------- configs/hifive_unleashed_defconfig | 33 ++++++++++++++----- 6 files changed, 66 insertions(+), 37 deletions(-) create mode 100644 board/sifive/hifive-unleashed/extlinux.conf create mode 100755 board/sifive/hifive-unleashed/post-build.sh diff --git a/board/sifive/hifive-unleashed/extlinux.conf b/board/sifive/hifive-unleashed/extlinux.conf new file mode 100644 index 0000000000..496e771d61 --- /dev/null +++ b/board/sifive/hifive-unleashed/extlinux.conf @@ -0,0 +1,4 @@ +label HiFive-Unleashed linux + kernel /boot/Image + devicetree /boot/hifive-unleashed-a00.dtb + append console=ttySIF0 root=/dev/mmcblk0p3 rootwait rw diff --git a/board/sifive/hifive-unleashed/genimage.cfg b/board/sifive/hifive-unleashed/genimage.cfg index 8eebc52355..21ae2fcb36 100644 --- a/board/sifive/hifive-unleashed/genimage.cfg +++ b/board/sifive/hifive-unleashed/genimage.cfg @@ -3,15 +3,22 @@ image sdcard.img { gpt = true } - partition bootloader { - image = "fw_payload.bin" - offset = 1M - size = 32M + partition loader1 { + image = "u-boot-spl.bin" + offset = 17K + size = 1M + partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47 + } + + partition loader2 { + image = "u-boot.itb" + size = 4M partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985 } partition rootfs { image = "rootfs.ext4" + bootable = true partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4 } } diff --git a/board/sifive/hifive-unleashed/linux.config.fragment b/board/sifive/hifive-unleashed/linux.config.fragment index f4f384088a..729746778d 100644 --- a/board/sifive/hifive-unleashed/linux.config.fragment +++ b/board/sifive/hifive-unleashed/linux.config.fragment @@ -1,16 +1,9 @@ CONFIG_HZ_100=y -CONFIG_CMDLINE="earlycon=sbi root=/dev/mmcblk0p2 rootwait" -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_SERIAL_SIFIVE=y -CONFIG_SERIAL_SIFIVE_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SIFIVE=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SIFIVE=y -CONFIG_MMC=y -CONFIG_MMC_SPI=y -CONFIG_CLK_U54_PRCI=y -CONFIG_CLK_GEMGXL_MGMT=y +CONFIG_MTD=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_BLOCK=y CONFIG_PWM=y CONFIG_PWM_SIFIVE=y diff --git a/board/sifive/hifive-unleashed/post-build.sh b/board/sifive/hifive-unleashed/post-build.sh new file mode 100755 index 0000000000..1f5ff6a611 --- /dev/null +++ b/board/sifive/hifive-unleashed/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/sifive/hifive-unleashed/readme.txt b/board/sifive/hifive-unleashed/readme.txt index 8d3fa6357f..9e337e17bc 100644 --- a/board/sifive/hifive-unleashed/readme.txt +++ b/board/sifive/hifive-unleashed/readme.txt @@ -30,35 +30,29 @@ Once the build has finished you will have the following files: output/images/ +-- fw_jump.bin +-- fw_jump.elf - +-- fw_payload.bin - +-- fw_payload.elf + +-- fw_dynamic.bin + +-- fw_dynamic.elf + +-- u-boot-spl.bin + +-- u-boot.itb +-- Image +-- rootfs.ext2 +-- rootfs.ext4 +-- rootfs.tar +-- sdcard.img - -Creating a bootable SD card with genimage -========================================= +Booting from MMC on the board +============================= Buildroot builds a SD card image for you. All you need to do is dd the image to your SD card, which can be done with the following command: - $ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0 bs=4096 - -Booting the SD card on the board -================================ + $ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0 -Make sure that the all DIP switches are set to the off position for -default boot mode (MSEL mode = 1111), insert the SD card and power -up the board. +Make sure that the DIP switches MSEL[3:0] are set to 1011 for booting +from MMC. Insert the SD card and power up the board. Connect the USB cable and open minicom (/dev/ttyUSB1, 115200, 8N1). -See the 'SiFive HiFive Unleashed Getting Started Guide' for -more details (https://www.sifive.com/documentation). - You will get a warning reported by fdisk when you examine the SD card. This is because the genimage.cfg file doesn't specify the SD card size (as people will naturally have different sized cards), so the @@ -73,3 +67,12 @@ You will see something like this at boot time: [ 2.334824] GPT:190496 != 122142719 [ 2.338302] GPT: Use GNU Parted to correct GPT errors. [ 2.343456] mmcblk0: p1 p2 + +Documentation +============= +See the 'SiFive HiFive Unleashed Getting Started Guide' for +more details (https://www.sifive.com/documentation). + +See the Amarula Solutions BSP sifive wiki for information of +usage and indetail steps. +https://wiki.amarulasolutions.com/bsp/riscv/sifive/hifive-unleashed.html diff --git a/configs/hifive_unleashed_defconfig b/configs/hifive_unleashed_defconfig index 24576570da..0fa40f225e 100644 --- a/configs/hifive_unleashed_defconfig +++ b/configs/hifive_unleashed_defconfig @@ -14,27 +14,44 @@ BR2_TARGET_GENERIC_GETTY=y BR2_TARGET_GENERIC_GETTY_PORT="ttySIF0" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sifive/hifive-unleashed/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/sifive/hifive-unleashed/post-build.sh" # Filesystem BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -# Linux headers same as kernel, a 5.1 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y +# Linux headers same as kernel, a 5.6 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_6=y # Kernel BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_GIT=y -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/alistair23/linux.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="hifive-unleashed-5.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.6" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sifive/hifive-unleashed/linux.config.fragment" -BR2_LINUX_KERNEL_IMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sifive/hifive-unleashed-a00" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y -# Bootloader +# opensbi BR2_TARGET_OPENSBI=y BR2_TARGET_OPENSBI_PLAT="sifive/fu540" -BR2_TARGET_OPENSBI_LINUX_PAYLOAD=y +BR2_TARGET_OPENSBI_FW_DYNAMIC=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,amarula,u-boot-amarula)v3.0-hifive-unleashed.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sifive_fu540" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y +BR2_TARGET_UBOOT_NEEDS_OPENSBI_FW_DYNAMIC=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin" # Host tools BR2_PACKAGE_HOST_GENIMAGE=y -- 2.17.1