From: Tom Rini Date: Wed, 6 May 2020 15:56:58 -0400 Subject: [PATCH v3 00/12] phy: atheros: dt bindings and cleanup In-Reply-To: <3821376944ba5719e4dcd2a40ee2b1b1@walle.cc> References: <20200506191459.10668-1-michael@walle.cc> <3821376944ba5719e4dcd2a40ee2b1b1@walle.cc> Message-ID: <20200506195658.GR12564@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, May 06, 2020 at 09:47:10PM +0200, Michael Walle wrote: > Am 2020-05-06 21:14, schrieb Michael Walle: > > This patch series superseeds the following two: > > From Vladimir Oltean > > https://patchwork.ozlabs.org/cover/1031360/ > > From me: > > https://patchwork.ozlabs.org/cover/1184507/ > > > > Although the first is marked as accepted into u-boot-net I guess it was > > removed due to broken boards ("DT as ABI", RGMII delay was fixed and > > thus > > breaks the board). > > > > After disussing with Vladimir, I've integrated his patches with this > > series. Also the first one > > Address packet drops at low traffic rate due to SmartEEE feature > > was dropped because it will likely be fixed by making u-boot support the > > eee-broken-X device tree properties. Apart from that, only the subject > > was > > changed and a note about possible board breakage was added the patch > > which > > changes the delay behaviour. > > > > For all of those, who will test this patchset, the device tree binding > > needs the phydev->node property, which needs to be set in every network > > driver. If the device tree binding is not working for you have a look at > > the > > ar803x_of_init: found PHY node: phy at 0 > > output. In the case above "phy at 0" is the phy node in the device tree. If > > instead the node of your network device is displayed, you have to set > > the phydev->node property in your network device driver. > > > > For the fsl_enetc driver this patchset will add it: > > https://patchwork.ozlabs.org/cover/1188043/ > > > > changes since v2: > > - rebased onto latest master, esp. #include > > > > changes since v1: > > - pull all Vladimirs Oltan's patches and rebase mine onto them > > - fix the CLK_25M settings for the AR8035 > > - add two new patches "fix AR8021 PHY ID mask" and "use defines for PHY > > IDs" > > - use the new kernel device tree binding for the AR803x PHYs: > > https://patchwork.ozlabs.org/patch/1188293/ > > - add debugging output > > > > Michael Walle (7): > > phy: atheros: fix AR8021 PHY ID mask > > phy: atheros: use defines for PHY IDs > > phy: atheros: introduce debug read and write functions > > phy: atheros: move delay config to common function > > phy: atheros: add device tree bindings and config > > phy: atheros: ar8035: remove static clock config > > phy: atheros: consolidate {ar8031|ar8035}_config() > > Oh I've actually forgot the "Acked-by:" from Joe from the v2 series. > > All but the > > phy: atheros: fix AR8021 PHY ID mask > were acked by Joe. > > Tom, should I send a v4 where I drop that patch and could you pull > this series? Yes please, sounds like a plan, thanks for the explanation! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: