From: Patrick Wildt Date: Fri, 8 May 2020 11:59:47 +0200 Subject: imx: move ATF to the back of the FIT to fix loading over yModem Message-ID: <20200508095947.GA60002@ryzen.blueri.se> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de With yModem the FIT Image is only supplied once, so we can only seek forward in the yModem supplied image and never backwards. With the recent changes to the SPL mechanism, including loading U-Boot first, FDT after, then the loadables, we must also reorder the FIT image script to make sure that the loadables are last in the FIT image. Signed-off-by: Patrick Wildt diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh index dd1ca5ad3fd..fe12b7bb4bd 100755 --- a/arch/arm/mach-imx/mkimage_fit_atf.sh +++ b/arch/arm/mach-imx/mkimage_fit_atf.sh @@ -62,6 +62,23 @@ cat << __HEADER_EOF compression = "none"; load = <$BL33_LOAD_ADDR>; }; +__HEADER_EOF + +cnt=1 +for dtname in $* +do + cat << __FDT_IMAGE_EOF + fdt@$cnt { + description = "$(basename $dtname .dtb)"; + data = /incbin/("$dtname"); + type = "flat_dt"; + compression = "none"; + }; +__FDT_IMAGE_EOF +cnt=$((cnt+1)) +done + +cat << __HEADER_EOF atf@1 { description = "ARM Trusted Firmware"; os = "arm-trusted-firmware"; @@ -88,20 +105,6 @@ cat << __HEADER_EOF __HEADER_EOF fi -cnt=1 -for dtname in $* -do - cat << __FDT_IMAGE_EOF - fdt@$cnt { - description = "$(basename $dtname .dtb)"; - data = /incbin/("$dtname"); - type = "flat_dt"; - compression = "none"; - }; -__FDT_IMAGE_EOF -cnt=$((cnt+1)) -done - cat << __CONF_HEADER_EOF }; configurations {