From: Thomas Petazzoni Date: Sat, 9 May 2020 22:01:03 +0200 Subject: [Buildroot] [PATCH 1/2] uboot: add support for bundling OpenSBI FW_DYNAMIC into U-Boot In-Reply-To: <20200506100845.4356-1-jagan@amarulasolutions.com> References: <20200506100845.4356-1-jagan@amarulasolutions.com> Message-ID: <20200509220103.380c57a7@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hello Jagan, On Wed, 6 May 2020 15:38:44 +0530 Jagan Teki wrote: > Some RISC-V platforms (such as SiFive FU540) have a boot process > where U-Boot encapsulates the FW_DYNAMIC part of the ARM trusted > firmware. For such platforms, we need to build OpenSBI before U-Boot, > and pass a OPENSBI variable pointing to OpenSBI bl31.bin to the > U-Boot build process. > > This commit introduces a BR2_TARGET_UBOOT_NEEDS_OPENSBI_FW_DYNAMIC > variable to achieve this. > > Signed-off-by: Jagan Teki > --- > boot/uboot/Config.in | 15 +++++++++++++++ > boot/uboot/uboot.mk | 5 +++++ > 2 files changed, 20 insertions(+) Since you had comments from Alistair Francis on both patches, I mark these as Changes Requested in patchwork. Could you please take into account the feedback from Alistair, and send a new iteration? Thanks, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com