From: sbabic at denx.de Date: Mon, 11 May 2020 12:16:00 +0200 (CEST) Subject: [PATCH 03/13] thermal: imx_tmu: Add support for thermal sensor on iMX8MM In-Reply-To: <20200503141957.14635-4-peng.fan@nxp.com> Message-ID: <20200511101600.C7C7D813C5@phobos.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > The analog sensors on iMX8MM are new, used for 14LPP process. So the > Temperature Sensor Monitoring Unit (TMU) has some change accordingly. > We use version 2 in TMU driver to represent the new TMU, so the one > driver can service for both i.MX8MQ/M. > Signed-off-by: Peng Fan Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================