From: Gabriel Krisman Bertazi Subject: [PATCH v4 0/2] Historical Service Time Path Selector Date: Mon, 11 May 2020 12:39:08 -0400 Message-ID: <20200511163910.3778467-1-krisman@collabora.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: agk@redhat.com, snitzer@redhat.com Cc: dm-devel@redhat.com, linux-kernel@vger.kernel.org, song@kernel.org, breeves@redhat.com, mpatocka@redhat.com, khazhy@google.com, Gabriel Krisman Bertazi , kernel@collabora.com List-Id: dm-devel.ids Hi, This fourth version of HST applies the suggestion from Mikulas Patocka to do the ktime_get_ns inside the mpath map_bio instead of generic device-mapper code. This means that struct dm_mpath_io gained another 64bit field. For the request-based case, we continue to use the block layer start time information. With this modification, I was able obtain similar performance on BIO to request-based multipath with HST on the benchmarks shared in v1. v3: https://www.redhat.com/archives/dm-devel/2020-April/msg00308.html v2: https://www.redhat.com/archives/dm-devel/2020-April/msg00270.html v1: https://www.redhat.com/archives/dm-devel/2020-April/msg00176.html Gabriel Krisman Bertazi (1): md: mpath: Pass IO start time to path selector Khazhismel Kumykov (1): md: mpath: Add Historical Service Time Path Selector drivers/md/Kconfig | 11 + drivers/md/Makefile | 1 + drivers/md/dm-historical-service-time.c | 561 ++++++++++++++++++++++++ drivers/md/dm-mpath.c | 12 +- drivers/md/dm-path-selector.h | 2 +- drivers/md/dm-queue-length.c | 2 +- drivers/md/dm-service-time.c | 2 +- 7 files changed, 585 insertions(+), 6 deletions(-) create mode 100644 drivers/md/dm-historical-service-time.c -- 2.26.2