From: Jeff Kirsher Date: Thu, 28 May 2020 22:27:12 -0700 Subject: [Intel-wired-lan] [next-queue v3] i40e: Add a check to see if MFS is set Message-ID: <20200529052712.4214-1-jeffrey.t.kirsher@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: From: Todd Fujinaka A customer was chain-booting to provision his systems and one of the steps was setting MFS. MFS isn't cleared by normal warm reboots (clearing requires a GLOBR) and there was no indication of why Jumbo Frame receives were failing. Add a warning if MFS is set to anything lower than the default. Signed-off-by: Todd Fujinaka --- v3: removed the unnecessary 'for loop' drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 77a6be8ee112..2e454b0d71ee 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -15295,6 +15295,14 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) i40e_stat_str(&pf->hw, err), i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status)); + /* make sure the MFS hasn't been set lower than the default */ +#define MAX_FRAME_SIZE_DEFAULT 0x2600 + val = (rd32(&pf->hw, I40E_PRTGL_SAH) & + I40E_PRTGL_SAH_MFS_MASK) >> I40E_PRTGL_SAH_MFS_SHIFT; + if (val < MAX_FRAME_SIZE_DEFAULT) + dev_warn(&pdev->dev, "MFS for port %x has been set below the default: %x\n", + i, val); + /* Add a filter to drop all Flow control frames from any VSI from being * transmitted. By doing so we stop a malicious VF from sending out * PAUSE or PFC frames and potentially controlling traffic for other -- 2.26.2