Return-Path: From: Sasha Levin Subject: [PATCH AUTOSEL 5.7 071/274] batman-adv: Revert "disable ethtool link speed detection when auto negotiation off" Date: Mon, 8 Jun 2020 19:02:44 -0400 Message-Id: <20200608230607.3361041-71-sashal@kernel.org> In-Reply-To: <20200608230607.3361041-1-sashal@kernel.org> References: <20200608230607.3361041-1-sashal@kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Sven Eckelmann , Matthias Schiffer , Simon Wunderlich , Sasha Levin , b.a.t.m.a.n@lists.open-mesh.org, netdev@vger.kernel.org From: Sven Eckelmann [ Upstream commit 9ad346c90509ebd983f60da7d082f261ad329507 ] The commit 8c46fcd78308 ("batman-adv: disable ethtool link speed detection when auto negotiation off") disabled the usage of ethtool's link_ksetting when auto negotation was enabled due to invalid values when used with tun/tap virtual net_devices. According to the patch, automatic measurements should be used for these kind of interfaces. But there are major flaws with this argumentation: * automatic measurements are not implemented * auto negotiation has nothing to do with the validity of the retrieved values The first point has to be fixed by a longer patch series. The "validity" part of the second point must be addressed in the same patch series by dropping the usage of ethtool's link_ksetting (thus always doing automatic measurements over ethernet). Drop the patch again to have more default values for various net_device types/configurations. The user can still overwrite them using the batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE. Reported-by: Matthias Schiffer Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Sasha Levin --- net/batman-adv/bat_v_elp.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 1e3172db7492..955e0b8960d6 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -127,20 +127,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) rtnl_lock(); ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings); rtnl_unlock(); - - /* Virtual interface drivers such as tun / tap interfaces, VLAN, etc - * tend to initialize the interface throughput with some value for the - * sake of having a throughput number to export via ethtool. This - * exported throughput leaves batman-adv to conclude the interface - * throughput is genuine (reflecting reality), thus no measurements - * are necessary. - * - * Based on the observation that those interface types also tend to set - * the link auto-negotiation to 'off', batman-adv shall check this - * setting to differentiate between genuine link throughput information - * and placeholders installed by virtual interfaces. - */ - if (ret == 0 && link_settings.base.autoneg == AUTONEG_ENABLE) { + if (ret == 0) { /* link characteristics might change over time */ if (link_settings.base.duplex == DUPLEX_FULL) hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX; -- 2.25.1