From: Sasha Levin Subject: [PATCH AUTOSEL 5.6 251/606] ARM: dts: rockchip: fix phy nodename for rk3228-evb Date: Mon, 8 Jun 2020 19:06:16 -0400 Message-ID: <20200608231211.3363633-251-sashal@kernel.org> References: <20200608231211.3363633-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200608231211.3363633-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Johan Jonker , Heiko Stuebner , Sasha Levin , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rockchip.vger.kernel.org From: Johan Jonker [ Upstream commit 287e0d538fcec2f6e8eb1e565bf0749f3b90186d ] A test with the command below gives for example this error: arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0: '#phy-cells' is a required property The phy nodename is normally used by a phy-handle. This node is however compatible with "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" which is just been added to 'ethernet-phy.yaml'. So change nodename to 'ethernet-phy' for which '#phy-cells' is not a required property make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200416170321.4216-1-jbx6244-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Signed-off-by: Sasha Levin --- arch/arm/boot/dts/rk3228-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 5670b33fd1bd..aed879db6c15 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -46,7 +46,7 @@ mdio { #address-cells = <1>; #size-cells = <0>; - phy: phy@0 { + phy: ethernet-phy@0 { compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"; reg = <0>; clocks = <&cru SCLK_MAC_PHY>; -- 2.25.1