From: Tom Rini Date: Tue, 16 Jun 2020 16:10:46 -0400 Subject: U-Boot atheros PHY support and cubox ethernet In-Reply-To: References: <20200616195505.GA3129@bill-the-cat> Message-ID: <20200616201046.GZ24893@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Jun 16, 2020 at 10:58:26PM +0300, Vladimir Oltean wrote: > Hi Tom, > > On Tue, 16 Jun 2020 at 22:55, Tom Rini wrote: > > > > Hey all, > > > > In commit 4346df3392c0 ("phy: atheros: Make RGMII Tx delays actually > > configurable for AR8035") we brought in changes to get in to line with > > upstream linux kernel support for this PHY and in turn deal with more > > "driver was wrong, DT was wrong too" changes. Now the problem I have is > > that ethernet on my Hummingboard doesn't work AND as far as I can tell, > > the DTB is correct and saying phy-mode = "rgmii-id" now not "rgmii". It > > also looks to match what's in v5.7 for the kernel. What do I need to do > > here next? Thanks! > > > > -- > > Tom > > Reverting 4346df3392c0 makes your interface work? Yup. > What is the DTS path that your hummingboard uses? Good question. Per board/solidrun/mx6cuboxi/mx6cuboxi.c: /* * This is not a perfect match. Avoid dependency on the DM GPIO driver * needed * for accurate board detection. Hummingboard2 DT is good enough for * U-Boot on * all Hummingboard/Cubox-i platforms. */ so arch/arm/dts/imx6dl-hummingboard2-emmc-som-v15.dts is the base. But the board really is the original hummingboard platform. Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: