From: Thomas Petazzoni Date: Wed, 17 Jun 2020 21:10:22 +0200 Subject: [Buildroot] [PATCH v2 13/17] configs/olpc_xo1: enable JFFS2 image In-Reply-To: <20200617104925.1036330-14-lkundrak@v3.sk> References: <20200617104925.1036330-1-lkundrak@v3.sk> <20200617104925.1036330-14-lkundrak@v3.sk> Message-ID: <20200617211022.79a48a3f@windsurf.home> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Wed, 17 Jun 2020 12:49:21 +0200 Lubomir Rintel wrote: > The machine has a NAND flash device and firmware capable of loading the > OS from a JFFS2 file system on it. Enable creation of JFFS2 image that > can be written to said flash device. > > Signed-off-by: Lubomir Rintel > --- > configs/olpc_xo1_defconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/configs/olpc_xo1_defconfig b/configs/olpc_xo1_defconfig > index 5919f6ab36..36ac051ffb 100644 > --- a/configs/olpc_xo1_defconfig > +++ b/configs/olpc_xo1_defconfig > @@ -21,4 +21,8 @@ BR2_TARGET_ROOTFS_EXT2_4=y > BR2_TARGET_ROOTFS_EXT2_LABEL="XO1" > BR2_TARGET_ROOTFS_EXT2_SIZE="32M" > BR2_TARGET_ROOTFS_EXT2_MKFS_OPTIONS="-O dir_index,^huge_file,^64bit,^extent" > +BR2_TARGET_ROOTFS_JFFS2=y > +BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_128K=y > +BR2_TARGET_ROOTFS_JFFS2_PAD=y > BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTD=y This last line is not needed: host-mtd is already a dependency of the jffs2 filesystem logic, see fs/jffs2/jffs2.mk. So I dropped this last line. Thanks! Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com