From: Patrick Delaunay Date: Fri, 19 Jun 2020 11:19:45 +0200 Subject: [PATCH] ARM: dts: stm32: Reinstate card detect behavior on ST boards Message-ID: <20200619091945.11656-1-patrick.delaunay@st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The cd-gpios with (GPIO_ACTIVE_LOW | GPIO_PULL_UP) gpio is thus far unsupported, reinstate the old cd-gpios behavior until this handling is fully implemented. This avoid potential issue for SDCard boot: the card detect fails with floating gpio. Hi, I don't have boot issue on my boards (DK2 and EV1) but this patch avoids potential issue with floating gpio as issue see by Marek on DHSOM. To be reverted in v2020.10 when the serie [1] is accepted. The generic impacts in gpio uclass [2] is already accepted for V2020.07 and merged in master branch. [1] stm32mp1: activate gpio hog support and add new pinctrl ops http://patchwork.ozlabs.org/project/uboot/list/?series=181294 [2] dm: add support of new binding in gpio and pincontrol http://patchwork.ozlabs.org/project/uboot/list/?series=152777&state=* Patrick END Signed-off-by: Patrick Delaunay --- arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 2 ++ arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 3fedb6f1e1..e13dade463 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -171,6 +171,8 @@ &sdmmc1 { u-boot,dm-spl; + broken-cd; + /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a { diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index a07c585415..b16dc28d47 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -167,6 +167,8 @@ &sdmmc1 { u-boot,dm-spl; + broken-cd; + /delete-property/ cd-gpios; }; &sdmmc1_b4_pins_a { -- 2.17.1