From: Gary Bisson Date: Fri, 19 Jun 2020 15:20:43 +0200 Subject: [Buildroot] [PATCH 1/3] package/freescale-imx/firmware-imx: install sdma firmware for i.MX8M{, M, N} In-Reply-To: References: <20200615130633.19909-1-sebastien.szymanski@armadeus.com> Message-ID: <20200619132043.GA525498@p1g2> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi Sebastien, On Mon, Jun 15, 2020 at 04:07:42PM +0200, S?bastien Szymanski wrote: > Hi Fabio, > > On 6/15/20 3:49 PM, Fabio Estevam wrote: > > Hi S?bastien, > > > > On Mon, Jun 15, 2020 at 10:44 AM S?bastien Szymanski > > wrote: > > > >> -FIRMWARE_IMX_BLOBS = sdma vpu > >> +FIRMWARE_IMX_BLOBS = sdma epdc > > > > The commit log does not mention about removing the VPU firmware and > > adding the EPDC one. > > > > What is the reason for not installing the VPU firmware? > > > > I use the FIRMWARE_IMX_BLOBS to list the firmwares that go into > /lib/firmware/imx and also for patch 2. > The VPU firmwares still get installed in > FIRMWARE_IMX_INSTALL_TARGET_CMDS. I have added a cp command for that. Yes, but now you are installing all VPU + epdc firmware files for all platforms which is unnecessary. Those should only be selected depending on the platform you are using, exactly what you do for easrc. Regards, Gary