From: Tom Rini Date: Thu, 25 Jun 2020 18:14:12 -0400 Subject: [PATCH v2] ARM: dts: imx6q-tbs2910: Fix Ethernet regression In-Reply-To: <20200625111457.9285-1-festevam@gmail.com> References: <20200625111457.9285-1-festevam@gmail.com> Message-ID: <20200625221412.GU8432@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Jun 25, 2020 at 08:14:57AM -0300, Fabio Estevam wrote: > Since commit: > > commit 6333cbb3817ed551cd7d4e92f7359c73ccc567fc > Author: Michael Walle > Date: Thu May 7 00:11:58 2020 +0200 > > phy: atheros: ar8035: remove static clock config > > We can configure the clock output in the device tree. Disable the > hardcoded one in here. This is highly board-specific and should have > never been enabled in the PHY driver. > > If bisecting shows that this commit breaks your board it probably > depends on the clock output of your Atheros AR8035 PHY. Please have a > look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set > "clk-out-frequency = <125000000>" because that value was the hardcoded > value until this commit. > > Signed-off-by: Michael Walle > Acked-by: Joe Hershberger > > , the clock output setting for the AR803x driver is removed from being > hardcoded in the PHY driver and should be passed via device tree instead. > > Update the device tree with the "qca,clk-out-frequency" property so that > Ethernet can work again. > > Reported-by: Soeren Moch > Signed-off-by: Fabio Estevam > Tested-by: Soeren Moch Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: