From: Andrzej Pietrasiewicz Subject: [PATCH 2/3] thermal: imx: Use driver's local data to decide whether to run a measurement Date: Fri, 3 Jul 2020 12:43:53 +0200 Message-ID: <20200703104354.19657-3-andrzej.p@collabora.com> References: <20200703104354.19657-1-andrzej.p@collabora.com> Return-path: In-Reply-To: <20200703104354.19657-1-andrzej.p@collabora.com> Sender: linux-renesas-soc-owner@vger.kernel.org To: linux-pm@vger.kernel.org, linux-acpi@vger.kernel.org, netdev@vger.kernel.org, linux-wireless@vger.kernel.org, platform-driver-x86@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-renesas-soc@vger.kernel.org, linux-rockchip@lists.infradead.org Cc: "Rafael J . Wysocki" , Len Brown , Vishal Kulkarni , "David S . Miller" , Jiri Pirko , Ido Schimmel , Johannes Berg , Emmanuel Grumbach , Luca Coelho , Intel Linux Wireless , Kalle Valo , Peter Kaestle , Darren Hart , Andy Shevchenko , Sebastian Reichel , Miquel Raynal , Daniel Lezcano , Amit Kucheria , Support Opensource List-Id: linux-rockchip.vger.kernel.org Use driver's local data to evaluate the need to run or not to run a measurement. Signed-off-by: Andrzej Pietrasiewicz --- drivers/thermal/imx_thermal.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 9700ae39feb7..c0efa7bc48e2 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -252,10 +252,11 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) const struct thermal_soc_data *soc_data = data->socdata; struct regmap *map = data->tempmon; unsigned int n_meas; - bool wait; + bool wait, run_measurement; u32 val; - if (thermal_zone_device_is_enabled(tz)) { + run_measurement = !data->irq_enabled; + if (!run_measurement) { /* Check if a measurement is currently in progress */ regmap_read(map, soc_data->temp_data, &val); wait = !(val & soc_data->temp_valid_mask); @@ -282,7 +283,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) regmap_read(map, soc_data->temp_data, &val); - if (!thermal_zone_device_is_enabled(tz)) { + if (run_measurement) { regmap_write(map, soc_data->sensor_ctrl + REG_CLR, soc_data->measure_temp_mask); regmap_write(map, soc_data->sensor_ctrl + REG_SET, -- 2.17.1