From: Johan Jonker Subject: [PATCH] clk: rockchip: mark pclk_uart2 as critical on rk3328 Date: Wed, 8 Jul 2020 16:45:28 +0200 Message-ID: <20200708144528.20465-1-jbx6244@gmail.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: heiko@sntech.de Cc: zhangqing@rock-chips.com, mturquette@baylibre.com, sboyd@kernel.org, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: linux-rockchip.vger.kernel.org The rk3328 uart2 port is used as boot console and to debug. During the boot pclk_uart2 is disabled by a clk_disable_unused initcall. Fix the uart2 function by marking pclk_uart2 as critical on rk3328. Also add sclk_uart2 as that is needed for the same DT node. Signed-off-by: Johan Jonker --- drivers/clk/rockchip/clk-rk3328.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c index c186a1985..cb7749cb7 100644 --- a/drivers/clk/rockchip/clk-rk3328.c +++ b/drivers/clk/rockchip/clk-rk3328.c @@ -875,6 +875,8 @@ static const char *const rk3328_critical_clocks[] __initconst = { "aclk_gmac_niu", "pclk_gmac_niu", "pclk_phy_niu", + "pclk_uart2", + "sclk_uart2", }; static void __init rk3328_clk_init(struct device_node *np) -- 2.11.0